How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have to follow a series of steps that are unique to add a second ignition key. It requires dealer service using a handheld computer dubbed Tech-2. Then a new key and transponder have to be purchased and then programmed to the car.

It is recommended to rotate your keys so that one does not get worn out more quickly than the other. This will help keep your keys in perfect condition.

Replacement Case

In contrast to the traditional Saab keys of the past, the new keys have electronic components which makes it difficult to copy. This has made stealing cars significantly more difficult than 20 years ago. However, it also has made replacing lost keys an incredibly expensive endeavor.

saab 9 3 key replacement 9-3 owners should have two keys working. It is costly to replace a lost key, as it requires replacing the CIM module, as well as programming the locking cylinders. Dealers typically charge between $100 and $200 for this.

There are ways to avoid these high costs. Some parts dealers will use the code of an old key to cut a new metal blade for a fraction of the price of the dealer. The key must be the exact same as the original for it to function in your vehicle.

Follow these steps to replace the case. You will need a flathead screwdriver as well as some patience. With the screwdriver, pry apart the plastic, and then take off the emergency key. Once the case has been opened take the electronics out and put them back in the new case. Place the key with the correct badge inside the case.

Replacement Battery

The saab key fob replacement 9-3 replacement battery is an inexpensive component that can be quickly and easily replaced. This DIY video from YouTube user Cyclone Cyd explains how to replace the battery in the remote key fob in only four steps. This tutorial will work with any modern Saab key fob. However, the procedure could differ slightly.

This button is usually located close to the Saab logo on the back of the fob. This button is usually located near the saab 9-3 key not accepted contact service logo on the back of the fob. Use a flathead to insert the screwdriver into the tiny hole on this button. This should be enough to open the case of the fob to allow you to replace the battery.

Once the new CR1632 battery is in place You can then reassemble the remote key fob. You can then program it to your car. The entire process should take no more than a half hour at the most. It's a very easy process that does not require any special tools.

The process is a bit more complicated in the event that you lose your key, but it is possible. The dealer has to determine the VIN of the car and then order a replacement key blade and TWICE module that has the proper unique code. Then, they'll need to cut the replacement key and then program it with the latest software tool known as MDI.

Replacement Key Fob

The key fob is the device that locks and unlocks your car. It has an internal battery. They have a limited life span and will eventually fail. It is a common problem in all vehicles. The good thing is that you can replace the battery in most key fobs, without having to replace the entire case. You can buy replacement fobs from Amazon that have all the electronics already installed, so you'll be able to simply open the case and replace those batteries that are old. It is necessary to remove the emergency key before you can replace the batteries. To do this, insert a small flathead screwsdriver into the slot that is in the middle. Use the screwdriver to move around the case until it is split open, making it much easier to take it out.

If you're ready to replace your keys, have a spare in your possession. This will save you a lot of money. If you have an extra key, ask the dealer to cut it in half and program it to your car. This is much cheaper than buying a new key fob.

If you don't have a spare car key, you can add another key to your car, but this requires a lot of research and effort. A second key can cost several hundred dollars and it also requires programming of the car's computer. This can be done by a professional, however it's a costly option for most owners.

Replacement Ignition

The new SAAB 9-3 is an advanced alarm system built around a key code. This means that should you lose only one working key, acquiring another one can be very expensive because the car needs to have a computer module added and it must also be specifically programmed to accept an extra key. Locksmiths typically aren't able to program this or even a dealer will charge several hundreds of dollars just to program the new key!

Dealers will charge you a high price to replace your car computer (also called the CIM or SAAB twice) in the event that you lose your only functioning key. We can reprogram the existing EEPROM of your car's computer to make it ready to accept an additional key. This will save you more than 50% of the cost you pay at an auto dealer.

If you've owned a SAAB 9-3 for many years you're aware that the ignition keys aren't very durable. They can become extremely sticky, and the buttons can be ripped off from time to time It is recommended that you consider getting a replacement if yours isn't working properly. The good news is that replacing the ignition key isn't as complicated as it seems and can be done in a short time using the proper tools.