UPVC Replacement Door Handles

The old aluminium window handles on your doors wear out over time and need to be replaced. It is crucial to be able to match the dimensions of the handles you have previously replaced when replacing them.

The top screw's position, the lever and the keyhole dimensions are the three measurements that you need to determine. Use the size guide to assistance with this.

Inline Lever/Lever

A lever/lever handle is a contemporary door handle that is designed to fit new or replacement doors. This style of handle is available in many styles and finishes. A number of manufacturers make this handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The window handles replacement made of uPVC/Composite are made of tough materials and are perfect for multi-point lock doors that need a heavy-duty design. The handles are inline and operate with the same spindle as well as screw fixings, so they can be easily incorporated into doors made of uPVC/Composite, either new or old aluminium window handles.

The handle can be adjusted and angled to fit the needs of all users. The handle has been tested to 200,000 cycles. This ensures that the finish is of high quality and performance is maintained over time. The lever that springs is adjustable to fit a broad range of locks. This is particularly useful for doors with narrower frames, where the cylinder is located further back. A shortened lever can also be used on doors that have a latch that can be activated with the thumb on the inside.

Lever Pad

The lever pad upvc handle is different from the lever handles that are found on most doors. These handle types are either operated by one spindle or two spindles inline or offset. They are usually employed on UPVC doors with double glazing. They come in a variety of finishes & variations.

The handles are available in a variety of finishes including White chrome, and Gold. The finish is BS EN 1670 Grade 5 and is resistant to rust. This provides the handle with an outstanding performance and long-lasting durability for the purpose it was designed for.

All UPVC handle lever pads include a spindle and screws and can be mounted on the uPVC door. The 211mm backplate fixing centres permit a bigger size handle that can often be a benefit in replacing a defective or worn multi point door lock mechanism. The handle levers come with a spring, which solves the issue of door handles that sag out of the horizontal position when they are not being used.

When selecting the replacement UPVC handle and spindle it is crucial to match the dimensions of the PZ of both the multipoint lock and the uPVC door. This measurement is also called the "handle centre" or "cylinder centres and is an essential aspect in ensuring that you have the appropriate handles.

After you have determined the correct PZ size, you will need to ensure that the push and lever pads are designed to fit the American with Disabilities Act compliant handles you require for your door. These are typically rectangular or round in shape with an internal lever as well as an external push pad.

The majority of the UPVC Lever Pads we sell are sprung. This means they will return to a horizontal state when they are not in use instead of hanging, and possibly securing to the frame. This prevents draughts from entering the building. The majority of UPVC lever pad style handles come in both left and right handed versions that allow them to be put on either side of doors.

Euro Cylinder

Cylinder locks are commonly found on uPVC doors, but can also be used on other types of doors. The cylinder lock is operated by a key which unlocks the cylinder case. This exposes pins that can be aligned with the pins in the lock and allow them to turn the camera that rotates, opening the door. Euro Cylinders can be fitted with up to six pins with internal and external doors usually needing different levels of security.

Selecting the right cylinder for your needs is essential; it depends on the way your doors and handle are utilized. Doors that are external, for instance, should be fitted with cylinders with greater security and doors inside can be secured with the standard cylinder. Certain cylinders come with extra features that can improve security, like anti-drill or anti bump properties.

A euro cylinder needs to be properly measured to ensure it's the correct size for your door. The cylinder needs to be measured from the screw hole in the center to the ends of the cylinder. This includes the thumb turn, if there is one. If you are unable measure it using the lock in its position, you can take it out of it. It is crucial to avoid having a cylindrical lock that extends beyond the handle or escutcheon. This could make it vulnerable to lock snapping attacks.

Most modern cylinders are made with bump and anti-drill features that are built into their design. These are designed to reduce the chance of attack by forcing cylinders to turn in a new direction. This can help to deflect attacks and ensure your door is secure.

Certain cylinders are made to resist snapping. This is a more frequent kind of attack on cylinders where the break line in the lock is smashed using a special tool to break off the front of the cylinder to allow the door to be opened. This is a lot faster and easier to achieve than opening the door with a multipoint lock and leaves no evidence of a break-in, which could hinder the insurance claim.

Spring Cassette

The spring cassette is located within the base of your door handle's backplate, providing a spring solution and returning the multipoint lock handles back to their normal position after using. Previously a lot of these types of handle did not have a spring integrated into them, and as a result, they are more likely to slide or drop when the locking mechanism is removed. This component is the best way to fix this problem. It also prevents your upvc handle window door from becoming stuck in either the open or closed position as they aren't easy to close manually.

These spring cassettes were created to be used with sprung multipoint locks. They will not fit handles that aren't sprung, and you will have to cut a hole in your backplate in order for them to fit. (Please look at the image for a technical diagram). They are a replacement for damaged or missing cassettes inside the door handle backplate of numerous brands of uPVC doors. They feature a square cut-out that can accommodate an 8mm spindle, and are sold as a set.

These spring cassettes offer an excellent value solution to the issue of sagging door handles. They are simple to install and will extend the lifespan of your replace upvc window handle doors. Please contact our team to learn more about our selection of uPVC accessories and spares. We are always available to provide expert advice and support you.